AIPER
The Aiper Seagull Pro Cordless Robotic Pool Cleaner
Finally, a pool cleaner that works without you. The Aiper Seagull Pro is a fully cordless robotic cleaner that tackles your pool floor and walls, leaving you with crystal-clear water and zero hose tangles. Drop it in, press a button, and let it handle the hard work while you actually enjoy your pool.
Typical runtime per charge
Maximum pool coverage
Lift weight when empty
SMART NAVIGATION SPOTLIGHT
Aiper Seagull Pro
The Seagull Pro’s intelligent navigation system doesn’t just roam-it maps. Using advanced sensors and algorithms, it calculates an optimized path across your pool’s floor, walls, and waterline, ensuring no spot is missed. The result is a comprehensive coverage pattern that systematically cleans every inch, from the shallow end steps to the deep-end drain, without random, inefficient bouncing. This methodical…
- Intelligent navigation system calculates and follows an optimized cleaning path for full pool coverage.
- Comprehensive coverage pattern targets floor, walls, and waterline systematically.
- Cordless design eliminates hose tangles and allows for unrestricted movement.
- Powerful suction captures fine debris, leaves, and sediment.
MODEL COMPARISON
Seagull Pro vs. the Rest of the Aiper Line
Not all robotic pool cleaners are built the same, and the Aiper lineup proves it. From the flagship cordless Seagull Pro to entry-level corded options, here’s how the models stack up on the features that actually matter for your backyard.
Flagship Cordless Freedom
The Seagull Pro runs entirely on battery power-no floating cable snaking across the water. Corded models like the Seagull 600 tether you to an outlet and can tangle mid-clean. If you’ve ever untwisted a robot hose at 9 PM, you already know why this matters.
Smarter Coverage, Fewer Missed Spots
Aiper’s entry-level units follow random bounce patterns that rely on sheer time to cover the pool. The Seagull Pro maps walls and floors with an algorithmic path, finishing the job in fewer passes and with less energy wasted roaming open water.
Wall-Climbing Capability
Cheaper corded Aiper models stick mostly to the floor, leaving waterline grime for you to brush by hand. The Pro’s motorized tread and optimized buoyancy let it scale vertical surfaces, scrubbing tile lines and coves that budget bots simply can’t reach.
Heavier Debris Pickup
Aiper’s basic units handle fine sediment well but struggle with leaves, acorns, and twigs. The Seagull Pro packs a stronger suction motor paired with a wider intake throat, pulling in larger debris before it settles and clogs cheaper filtration baskets.
Longer Runtime Per Charge
The Pro’s high-capacity lithium cell delivers up to 150 minutes of cleaning on a single charge-enough for pools up to 3,200 square feet. Lower-tier Aiper cordless units top out around 90 minutes and may need a second charge for larger backyard pools.
Drop-and-Go Simplicity Across the Board
Every Aiper model, from the budget-friendly Seagull 600 to the Pro, skips complicated installation. You drop it in the water, press one button, and walk away. No booster pumps, no dedicated return lines, no plumber visit required.
VALUE ASSESSMENT
Is the Aiper Seagull Pro Worth Your Money?
The Aiper Seagull Pro sits in the mid-range price bracket for robotic Aiper Pool Vacuum, typically found between $599 and $799 depending on the retailer and current promotions. For many pool owners, the critical question isn’t just about features-it’s about whether the performance justifies the investment compared to cheaper manual options or significantly pricier autonomous competitors.
Measures how effectively the cleaner picks up fine silt, leaves, and larger debris across different pool surfaces like tile, vinyl, and fiberglass.
Determines whether the cleaner can complete a full cycle on a single charge for your specific pool dimensions, from compact above-ground units to large in-ground installations.
Evaluates the robot’s ability to climb walls, scrub the waterline tile band, and navigate steps or benches without getting stuck or missing zones.
Considers how easy it is to remove, clean, and reinsert the filter cartridge after each use, plus the frequency of part replacements over the product’s lifespan.
Looks at usable runtime per charge and how long the unit takes to fully recharge, since both directly affect how often your pool gets cleaned per week.
Assesses build quality, material resilience to pool chemicals, and the manufacturer’s warranty terms-because a two-year failure rate matters more than a two-week trial.
What a 90-Minute Cycle Actually Cleans
The Seagull Pro’s 90-minute cleaning cycle is designed to tackle your entire pool-from the floor to the waterline-in a single, uninterrupted run. Here’s how that time breaks down for a thorough clean.
Aiper Seagull Pro Robotic Pool Cleaner
Completes a full floor-to-waterline clean in 90 minutes, removing leaves, dirt, and fine debris from every surface it touches.
Aiper Seagull Pro Max
Aiper Seagull Pro Lite
Verdict
Why Anna Ditched Her Old Cleaner
“For homeowners tired of hose-based or manual cleaning rigs, the Seagull Pro delivers a genuinely hands-off upgrade that handles real-world pool geometry.”
What we like
— Completely cordless-no hoses, no pump connection, no tangles
— Climbs walls and scrubs the waterline tile where buildup collects
— Runs a full cycle on a single charge for pools up to 3,200 sq ft
— Filter basket pops out from the top for quick debris dumping
What to watch
— Occasionally pauses on steep slopes or drain covers before self-correcting
— Does not skim floating debris-only vacuums submerged surfaces
— Recharge time between cycles stretches close to four hours
How Easy Is the Filter to Clean?
The Aiper Seagull Pro features a top-load filter designed for quick, hassle-free maintenance. Here’s what you need to know about keeping it running at peak performance.
The filter sits in a top-load compartment-simply lift the lid on the top of the unit to reach it. No flipping the cleaner upside down or unscrewing panels. The design means you can grab the filter right after pulling the cleaner from your pool.
Frequency depends on how much debris lands in your pool-leaves, pollen, dirt. For typical weekly use, a rinse after every one to two cleaning cycles keeps suction strong. If you notice the cleaner slowing down mid-cycle, that’s a reliable sign the filter needs attention.
Running the cleaner without the filter is not recommended. The filter protects the internal impeller and motor housing from fine particles that could cause premature wear. Always make sure the cartridge is seated properly before starting a cycle.
Skip harsh chemical cleaners or pressure washers, which can damage the mesh. Stick to a standard garden hose. Also avoid letting a fully caked filter sit in the unit for days between uses, as dried debris is harder to rinse out and can restrict water flow on the next run.
Remove the filter cartridge from the top-load compartment, rinse it thoroughly under a garden hose to dislodge trapped debris, let it air-dry briefly, then slide it back into place. The entire rinse-and-replace process takes under two minutes with no tools or disassembly required.
The filter cartridge is reusable and built for repeated rinsing. With regular cleaning, most owners get several months of use before replacing it. Aiper sells replacement cartridges separately, so swapping in a fresh one is straightforward when the mesh starts to look worn or clogged even after rinsing.
The fine-mesh cartridge traps particles as small as 180 microns-everything from sand and silt to small leaves and bug fragments. Larger debris like whole acorns or heavy leaf loads may require you to clean the filter more frequently during peak fall season.
SUPPORT & CONFIDENCE
Protected by Aiper's 2-Year Warranty
Your Seagull Pro purchase comes with more than a cleaner pool-it comes with the backing of Aiper’s dedicated support network and a warranty built to last.
Full Warranty Coverage
Online Support Resources
US-Based Support Team